Figure 18: Primepower Serverview Window: "Create Group - Fujitsu Siemens Computers SX series User Manual

Functions of the System Management Console
2. If necessary, configure a further partition-specific user group with PRIMEPOWER
ServerView, e.g. part1grp.
i
Click on the Groups tab and select Groups -> Create from the menu bar:

Figure 18: PRIMEPOWER ServerView window: "Create group"

3. Set up the SCS user interface (Terminal in the Application Manager) for the partition
administrator using the following command (which must be executed with root
authorization):
/opt/FJSVscsl/bin/scslowneradd -h <server name of partition>:<partition
administration group> <username>
The -h option here stands for partition administrator.
U41272-J-Z385-3-76
User groups suitable for this have already been configured by default with the
name p0grp, p1grp, etc. and are used for the partition administrators bs2admin
and soladmin.
These groups can be used when configuring further partition administrators.
Alternatively, further user groups can also be created for this.
User groups and logins
51