Configuration and operation
You must make the following entries in the program window:
1. Select Network and Communication. The following window will open:
Figure 46: Xconfig: Network and Communication window
You make the following entries in this window:
Ê
Ê
Next, click the Configure... button next to Mode. Another window now opens:
Figure 47: Xconfig: XDMCP Startup Modes
In the window XDMCP Startup Modes you must enter the DNS name or IP address of the
SMC or the entry-level model under Connect Host in the General box.
If you do not enter any information at this point, when you start Exceed (from V8.0
onwards) a list of the reachable computers will be displayed and you can dynamically
select a computer from this.
136
Mode = XDMCP-query
Display Number = 0
Remote operation via PC
U41272-J-Z385-3-76