Primepower Serverview (Bs2000 System); Machine Administration Menu (For Entry-Level Models Only) - Fujitsu Siemens Computers SX series User Manual

Functions of the Solaris-CDE interface

3.3.5 PRIMEPOWER ServerView (BS2000 system)

SX server (not entry-level models)
A CDE action can also be created to call PRIMEPOWER ServerView as an application. The
call should be made in the System Management Console.
When creating the action, select the icon "WSA" instead of the icon "Dtterm".
The command to be entered should then be:
/opt/SMAW/bin/wsa `uname -n`
The command locally calls the PRIMEPOWER ServerView-application of the SMC.
SX server entry-level models with local console
To call PRIMEPOWER ServerView as an application in an entry server, you must call the
PRIMEPOWER ServerView program directly. Here the call is performed in the X2000
carrier system.
The following command must be entered in the CDE action:
/opt/SMAW/bin/wsa 'uname –n'

3.3.6 Machine Administration Menu (for entry-level models only)

In this case the functions for hardware administration, unlike those for SX servers with SMC,
are not integrated directly in the CDE interface. To call the machine administration menu
(see section "Displaying the configuration" on page
be created for the entry-level models in the SX series. The machine administration menu
requires root rights, which is why the ID madmin is created with corresponding assignment
of rights. The ID madmin allows direct access to the relevant function.
The following command must be entered in the CDE action:
dtterm -e sh –c "exec login madmin"
In this case the calling of the terminal emulation can be supplemented as mentioned above
by parameters for assigning a title text and for selecting a character set.
Example
dtterm -fn 9x15 -title "MAdmin – SX100" -e sh –c "exec login madmin"
U41272-J-Z385-3-76
Preconfiguring terminals
81) a further CDE action must therefore
39