Table 12: Settings In Primepower Serverview And Corresponding Obp Settings - Fujitsu Siemens Computers SX series User Manual

Performing DR
Examples
1. Specifying a setting for 2 XSBs:
eeprom no-mem-sb="01-1 01-2"
2. Resetting the setting for XSB 01-1:
eeprom no-mem-sb="01-2"
(The OBP parameter is supplied with a value from the Rest list.)
3. XSB 01-2 becomes the CPU-XSB by specifying all 3 settings:
eeprom no-mem-sb="01-2"
eeprom no-obp-sb="01-2"
eeprom no-io-sb="01-2"
The OBP settings no-obp-sb, no-mem-sb and no-io-sb can also be specified in the
VConfig application of PRIMEPOWER ServerView:
first mark the relevant system board in the Systemboards DR subtab of the Boards tab
Ê
Ê and right-click on the Modify action
The settings in PRIMEPOWER ServerView correspond to the OBP settings and command
parameters as follows:
Settings in the Systemboards DR tab
For Lock for Kernel Code: Yes
I/O deactivation: Yes
Memory deactivation: Yes

Table 12: Settings in PRIMEPOWER ServerView and corresponding OBP settings

322
OBP settings / Command parameters
no-obp-sb: The list contains the XSB name
no-io-sb: The list contains the XSB name
no-mem-sb: The list contains the XSB name
Dynamic Reconfiguration
U41272-J-Z385-3-76