Iod Messages; Messages Referring To Bus Devices - Fujitsu Siemens Computers SX series User Manual

IOD messages

13.3 IOD messages

13.3.1 Messages referring to bus devices

The messages issued by the I/O handler for bus devices begin with the message code
IOD0xxx to IOD9xxx.
IOD0000 IOD_Vxx RELEASE SL=mmm *** IOD-BUS IMPL READY ***
IOD0000 IOD GENERATED ON YYYY/MM/DD AT HH:MM:SS
Meaning
The IOD (I/O handler for bus devices whose I/Os are performed via X2000) issues this
message on every long IPL (=IMPL). It contains the generation date and the version of the
employed IOD. mmm could be, for example, 001.
IOD0001 IOD_Vxx RELEASE SL=mmm *** IOD IPL READY ***
Meaning
The IOD (I/O handler for bus devices whose I/Os are performed via X2000) issues this
message on every IPL.
IOD0859 IOT11 NO PCIB ADDITIONAL SPACE AVAILABLE
Meaning
A new device has been configured in X2000. The device could not be activated because
the maximum number of devices newly configured during the system run has been
exceeded.
Response
Perform an IMPL. It is then possible to configure new devices.
IOD0869 IOT01 DEVICE MN=xxxx DEACTIVATED
Meaning
The configuration data of the device with the mnemonic name xxxx has been modified. The
device has therefore been deactivated. The device can no longer be operated by BS2000
(condition code 3).
IOD0869 RKF05 DEVICE MN=xxxx ACTIVATED
Meaning
A new or existing device with the mnemonic name xxxx has been activated. The device can
now be operated from BS2000.
348
X2000 messages
U41272-J-Z385-3-76