Figure 3: Example Of An Operating Concept For An Sx Server; Operating Concept For Sx Servers With Smc - Fujitsu Siemens Computers SX series User Manual

Operating concept for SX servers with SMC

2.1 Operating concept for SX servers with SMC
The figure below shows the operating concept of an SX server with SMC and a BS2000 and
Solaris partition, taking the example of an SX130 configuration:

Figure 3: Example of an operating concept for an SX server

Up to and including SX140 the SMC for an SX server is based on a PRIMESTATION system
with Solaris 8. The SMC for an SX150 server is based on a PRIMEPOWER250 system with
Solaris 9. The user interface for all functions is the X-Window Common Desktop
Environment (CDE) interface. This is where the System Console Software (SCS) runs. This
is used to administer the hardware functions of the SX system, and in particular the
functions for starting up/shutting down the server and partitioning the system.
The DVD/CD-ROM drive of the SMC can be used across partitions. In this way, operating
systems and applications can be installed in every partition of the SX server.
12
System cabinet
Server
BS2000 partition
BS2000/OSD
(OSD/XC)
X2000
CCU
Modem
System Control LAN
System Management Console
SX1xx
Solaris partition
Solaris
SCF
Switch Switch
(SMC)
Operating concept of the SX servers
Router
PC
Browser
SINIX-TE
(optional)
9750 Emulation
(optional)
User LAN
Admin LAN
Exceed
U41272-J-Z385-3-76