Remote Operation Via Pc; Recommended Hardware And Software Configuration - Fujitsu Siemens Computers SX series User Manual

6 Remote operation via PC

An SX server is operated centrally via the System Management Console (SMC) or via the
integrated console or LAN console. In order to enable separate operation outside the
computer center, the user interface of the current console must be made available to the
center. This is done via PCs with a LAN connection to the current console (and, where
necessary, the server partitions); the PCs have access to the system user interface via an
X server.
In this case, the same administration functions are used as those available directly on the
console.
It is also possible to use an emulation keyboard to facilitate the operation of the BS2000
dialog functions on the PC. The BS2000 dialog is operated either via a 97801 emulation
using SINIX-TE directly on the PC (not possible if the Secure Shell is used), or via a 9750
emulation on the PC.

6.1 Recommended hardware and software configuration

PC system
A PC system equipped with at least a 500 MHz Pentium III processor, 256 MB of RAM
and a LAN interface should be used as the administration workstation.
PC console
The PC console must possess a minimum screen resolution of 1024x768 in order to be
able to present all the displayed information in legible form.
Personal computers from the Scenic Professional series or workstations from the
Celsius or Primergy series are recommended. If you have any queries concerning your
hardware configuration, please contact a Fujitsu Siemens Computers sales represen-
tative.
U41272-J-Z385-3-76
133