Table 2: Overview Of The Access Options To Xscf; Access Options To Xscf - Fujitsu Siemens Computers SX series User Manual

XSCF

4.7.2 Access options to XSCF

The table below provides an overview of the various access options to XSCF.
Function
XSCF Shell
XSCF Web-Funktion
Mail Report
SNMP Trap Report
Standard Console

Table 2: Overview of the access options to XSCF

Explanation of the table
– The value S (=supported) specifies whether the function supports a serial port and/or
SCF-LAN Ethernet. If the support is not provided the column concerned contains "-".
– The XSCF shell designates a Command Line Interface (CLI) on a PC connected with
XSCF.
– Standard Console designates the system console which can be reached from a PC
connected with XSCF with write authorization.
– The XSCF Web functions can be accessed via the Internet. This option is described
briefly in the
refer to the documentation
(XSCF)" [32].
118
Description
– Monitors the server. The status of the
server can be checked.
– Server power can be controlled from a
remote server
– Displays the server configuration. The
internal configuration of the server can be
checked.
Provides the same functions as the XSCF
shells, but provides graphical displays for
easier operation.
Reports errors and failures by e-mail so that
immediate measures can be taken.
Enables consolidated control for server admin-
istration in conjunction with SNMP manager.
Enables access to the system console and/or
OBP prompt.
section "Accesses to XSCF" on page
"PRIMEPOWER450/250 Extended System Control Facility
Functions of the System Management Console
121. For further information please
Serial port SCF-LAN
Ethernet
S S
- S
- S
- S
S S
U41272-J-Z385-3-76