X2000 channel connection error messages
13.5.4 HWI messages
The HWI messages are process-independent.
HWI message code:
<addr>
<chpid> ...
<oc>
<op>
<range> ...
...I003
write access not allowed - opcode:<oc> CHPID(s): <chpid> ...
Meaning
Software error: The write operation is undefined for the selected opcode.
...I004
illegal operation - oper:<op> CHPID(s): <chpid> ...
Meaning
Software error: The transferred operation is undefined.
...I010
illegal opcode - opcode:<oc> CHPID(s): <chpid> ...
Meaning
Software error: The opcode is undefined.
...I011
illegal address - addr:<addr> CHPID(s): <chpid> ...
Meaning
Input error: The CASA address for the opcode is invalid.
...I089
SMAWLboot_G_DATA failed, .......
The system error message is appended to the message.
Meaning
Software error: The "read data from CASA" request has been aborted.
...I090
SMAWLboot_S_DATA failed, .......
The system error message is appended to the message.
Meaning
Software error: The "write data to CASA" request has been aborted.
...I091
mmap_x2 (<request>) failed
Meaning
Software error: The mmap_x2 request <request> has been aborted.
364
Buffer start address for HWI opcode
List of CHPIDs for the channels in question
Selected HWI opcode (four characters)
Selected HWI operation (two characters)
List of CHPID areas (x0...xF) of affected channels without further speci-
fication
X2000 messages
U41272-J-Z385-3-76