Fujitsu Siemens Computers SX series User Manual page 83

Functions of the System Management Console
Example for SX130: displaying system information (Display System Information)
Enter "1"; the server-specific information will be displayed:
PRIMEPOWER800 Serial No:23092; System Clock:225 MHz;
Operation Panel Switch:Lock; Altitude:0 m;
Partition#00
Partition#01
Partition#02
Partition#03
Cabinet#0 Serial No:23092; RCI(000101ff);
This menu item displays the following information about the server:
Model
Specifies the model name, serial number and clock frequency of the server.
Operation panel
Specifies the position of the mode selector and the height above sea-level at which the
server is installed.
Partition
Displays information on previously defined partitions. This includes partition IDs of the
relevant partitions, the number of system boards, server IDs, MAC addresses, node
addresses and CPU clock frequency.
Cabinet
Shows information about the system cabinet. This includes the cabinet ID, cabinet serial
number, RCI addresses and the ID numbers of the partitions.
U41272-J-Z385-3-76
1 System Board;
Hostname:bari1; Host ID:80f30766;
Partition MAC:00.00.0e.25.07.66;
Partition Node address:10100;
CPU Clock:675 MHz; Enable Clock:675 MHz;
1 System Board;
Hostname:bari2; Host ID:80f3071d;
Partition MAC:00.00.0e.25.07.1d;
Partition Node address:10101;
CPU Clock:675 MHz; Enable Clock:675 MHz;
1 System Board;
Hostname:bari3; Host ID:80f309a4;
Partition MAC:00.00.0e.25.09.a4;
Partition Node address:10102;
CPU Clock:675 MHz; Enable Clock:675 MHz;
1 System Board;
Hostname:bari4; Host ID:80f309a5;
Partition MAC:00.00.0e.25.09.a5;
Partition Node address:10103;
CPU Clock:675 MHz; Enable Clock:675 MHz;
Partition[ 00 01 02 03 ] Master Clock;
Functions of the System Console Software (SCS)
83