Fujitsu Siemens Computers SX series User Manual page 89

Functions of the System Management Console
OBP commands
OBP help function
{0} ok help
A help text on the individual commands is output:
{0} ok help
go
boot
boot <device-name>
printenv
setenv <name> <value>
devalias
devalias <name> <value>
show-devs
Many Other commands are available.
{0} ok
System and boot configuration parameters
printenv
setenv [var] [value]
set-defaults
set-default boot-device
File download and boot
boot [dev] [kernel] [opts]
boot -s
boot -a
boot -r
boot -b
boot -v
boot net0
Power off and reset
reset-all
power-off
U41272-J-Z385-3-76
Functions of the System Console Software (SCS)
Shows the possible variable values which can be set
in OBP
Sets the variable values
Resets the variables to the default values
Resets the variable for the boot disk to the default
value
Boots in multiuser mode
Boots in single user mode
Boots interactively
Boots after changing the hardware configuration
Boots for diagnostics purposes
Loads a mini kernel. Only available to /root.
Boots with additional information (verbose mode)
Boots from the network
Hardware reset
Powers the system off
89