Fujitsu Siemens Computers SX series User Manual page 85

Functions of the System Management Console
You can make the following settings under System Notification Administration:
Output error messages in a message window on the system console
Notify the system administrator by e-mail
Determine whether the system administrator is to be informed by e-mail about errors
which occur.
If a notification is to be made, specify further information about the system adminis-
trator, e.g. his/her name and e-mail address.
Notify the relevant service engineer by e-mail
If a notification is to be made, specify further information about the service engineer,
e.g.his/her name and e-mail address.
Sender of the e-mail
Specify the e-mail address of the sender.
When notifying by e-mail, it is necessary to enter an SMTP server to which the mails can
be sent; enter this in the file /etc/hosts.
This entry must be created in the following format:
<IP address> <server name> mailhost
The name mailhost is predefined. It instructs Solaris to send mails to this address.
U41272-J-Z385-3-76
Functions of the System Console Software (SCS)
85