Figure 90: X2000 Window For Reconfiguring A Bs2000 Tape Device - Fujitsu Siemens Computers SX series User Manual

Global X2000 functions
2. In the second step, the MTC device must be configured with one of the systems from
the first step (BS2 Tapes -> Modify):

Figure 90: X2000 window for reconfiguring a BS2000 tape device

The Switch area of the window contains the following boxes:
You can use the [ --> ] and [ <-- ] buttons to assemble the contents of the node list.
These buttons allow you to move selected nodes from one box to the other.
Click the button Ok to complete and close the configuration of the MTC device. From
this point onwards, the PRIMEPOWER ServerView of all the BS2000 systems which
share the device will display the same list in the Switched nodes box.
U41272-J-Z385-3-76
The Switched nodes box lists those BS2000 systems which see the MTC device as a
shared device
The Available nodes box lists those BS2000 systems which see the MTC device as
a single device (Caution: The display in this field is limited by the marking in the left
section of the PRIMEPOWER ServerView main display; see the note on
Magnetic tape cartridge devices
page 236).
235