The X2000 User Interface; Notes On Configuring Primepower Serverview Domains - Fujitsu Siemens Computers SX series User Manual

8 The X2000 user interface

i
The installation and operation of the graphical user interface of PRIMEPOWER ServerView
are described in the manual
tration within a
In this chapter we simply present an overview of the available functions. Detailed infor-
mation on the individual functions can be found in the online help system of the Bs2Devices
and Tools applications.

8.1 Notes on configuring PRIMEPOWER ServerView domains

On the SX server, all the partitions and the SMC form an administration domain. For this
reason, DomainAdmin and PRIMEPOWER ServerView are installed on all the partitions
and on the SMC. By default, the SMC is declared as so-called management server in order
to make it possible to administer all partitions in the domain from there. On the SMC, also
PRIMEPOWER ServerView should be started.
Only one system administrator can start an application in PRIMEPOWER ServerView in
write mode at any one time. In read mode, all the applications can be started as often as
required.
U41272-J-Z385-3-76
The section "Notes on configuring PRIMEPOWER ServerView
SX servers with SMC (and not to the SX server entry-level models). The other
sections below apply to all SX servers.
Domain" [5].
"PRIMEPOWER ServerView Suite V2.2
domains" applies to
– System Adminis-
195