Table of Contents
Advertisement
Configuring the Server
Other ON/OFF possibilities
In addition to the ON/OFF button, the server can be switched ON and OFF in
the following ways:
– Specified switch-On time/switch-OFF time
The server is automatically switched ON or OFF at a time specified in the
ServerView programme.
– Ring indicator
The server is switched ON via an internal or external modem.
– Wakeup On LAN (WOL)
The server is switched ON by a command via the LAN (Magic Package).
– After power failure
The server automatically switches ON following a power failure (depending
of the settings in the BIOS).
5.4
Configuring the Server
This section contains information about configuring the server and installing the
operating system.
I
Make sure that the energy saving functions are disabled in the BIOS Setup
during server operation.
5.4.1
Configuration with ServerStart
Configuring HostRAID
The server is equipped with an onboard SCSI controller with HostRAID
functionality. Configure HostRAID before you begin with ServerStart.
I
To configure HostRAID the controller has its own RAID-Select Utility. For
further information see "Adaptec HostRAID User's Guide" on the Server-
Books CD (choose Controllers from the menu).
With the ServerStart-CD provided, you can configure the server and install the
operating system in a convenient manner. The menu-guided configuration
includes the server configuration with the SCU and the RAID controller configu-
ration with the GAM (Global Array Manager) and/or Adaptec Storage Manager.
62
Preparation for use and operation
A26361-K879-Z102-3-7619
Advertisement
Table of Contents
