Preparation
4.3.2
Removing the system fan 2
1
Figure 6: Removing the system fan 2
Ê Disconnect the fan cable from the connector FAN2 SYS on the system
board.
Ê Pull the lock (1) in direction of the traverse and swivel the system fan 2 up
and out.
Ê Remove the system fan 2 in direction of the arrow (2).
4.3.3
Removing the traverse with the air duct over the
main memory
Ê Remove the system fan 1 and system fan 2.
2
Figure 7: Removing the traverse
Ê Push the lock (1) and pull out the traverse (2).
Ê Unhook the traverse (3).
TX200 S4
2
1
Options Guide
System fans and traverse
3
25