Switching The Server On And Off - Fujitsu Siemens Computers PRIMERGY B120 Operating Manual

Switching the server on and off

4.3 Switching the server on and off
If after switching on the server there is nothing but flickering stripes on the screen, switch
!
the server off immediately (see
monitor screen").
The ON/OFF switch and the main switch do not disconnect the server from the line
voltage. To disconnect the line voltage completely, remove the power plug from the
socket.
a
0
I
a
0
I
A26361-K646-Z102-1-7619
Preparation for use and operation
"Troubleshooting and tips" - "Flickering stripes on the
b
c
c
b
27