Table 97: Show L2Tp Dial-Out Virtual-Router Output Fields - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

Meaning
Related Topics
Copyright © 2010, Juniper Networks, Inc.
host1:dialout#show l2tp dial-out virtual-router summary
To display detailed configuration, state, and statistics:
host1:dialout#show l2tp dial-out virtual-router detail
To display information about the operational or administrative state:
host1:dialout#show l2tp dial-out virtual-router state down
To displays dial-out information across all virtual routers:
host1:dialout#show l2tp dial-out virtual-router allVirtualRouters
NOTE: The level of a user's permission determines the use of the allVirtualRouters
option. For example, if you have permission to view only the current virtual router, then
that is all that is displayed when you enter a command.
Table 97 on page 445 lists the show l2tp dial-out virtual-router command output fields.

Table 97: show l2tp dial-out virtual-router Output Fields

Field Name
Virtual router
Virtual router operational status
Maximum trigger buffers per
session
For detailed information about operational states, see Dial-Out Operational States on
page 403
show l2tp dial-out virtual-router
Chapter 16: Monitoring L2TP and L2TP Dial-Out
Field Description
Name of VR
Operational status of the VR
Maximum number of trigger packets held in buffer
while the dial-out session is being established
445