Show System Uptime - Juniper JUNOS OS 10.3 - SOFTWARE Manual

show system uptime

Syntax
Syntax (EX Series
Switch)
Syntax (TX Matrix
Router)
Syntax (TX Matrix Plus
Router)
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
show system uptime
show system uptime
<all-members>
<local>
<member member-id>
show system uptime
<all-chassis | all-lcc | lcc number | scc>
show system uptime
<detail>
<all-chassis | all-lcc | lcc number | sfc number>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
sfc
Display the current time and information about how long the router or switch, router or
switch software, and routing protocols have been running.
—Show time since the system rebooted and processes started.
none
all-chassis —(TX Matrix and TX Matrix Plus routers only) (Optional) Show time since the
system rebooted and processes started on all the routers in the chassis.
—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
all-lcc
show time since the system rebooted and processes started for all T640 routers (or
line-card chassis) connected to the TX Matrix router. On a TX Matrix Plus router,
show time since the system rebooted and processes started for all T1600 routers
(or line-card chassis) connected to the TX Matrix Plus router.
—(EX4200 switches only) (Optional) Show time since the system rebooted
all-members
and processes started on all members of the Virtual Chassis configuration.
lcc number —(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
show time since the system rebooted and processes started for a specific T640
router that is connected to the TX Matrix router. On a TX Matrix Plus router, show
time since the system rebooted and processes started for a specific T1600 router
that is connected to the TX Matrix Plus router. Replace
through 3 .
—(EX4200 switches only) (Optional) Show time since the system rebooted and
local
processes started on the local Virtual Chassis member.
member member-id —(EX4200 switches only) (Optional) Show time since the system
rebooted and processes started on the specified member of the Virtual Chassis
configuration. Replace
Chapter 17: Operational Mode Commands for System Setup
with a value from 0 through 9.
member-id
with a value from
number
315
0