Table of Contents
Advertisement
IP A
P
DDRESSING AND
ROTOCOL
SHOW IP IRDP
show ip irdp
Overview
This command displays whether IRDP is globally enabled on your device, and the
status of the debugging modes.
If the debug ip irdp command has been set with the detail parameter then the
both parameter is also set and the output will show "packet debugging mode is
all".
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip irdp
Syntax
Mode
User Exec and Privileged Exec
Example
To display global IRDP configuration, use the command:
awplus#
Output
Figure 22-9: Example output from the show ip irdp command
Figure 22-10: Example output from the show ip irdp command with debug ip
Figure 22-11: Example output from the show ip irdp command with debug ip
Related
debug ip irdp
commands
router ip irdp
C613-50644-01 Rev B
C
OMMANDS
show ip irdp
IRDP is enabled
event debugging is disabled
nsm debugging is disabled
packet debugging mode is disabled
irdp detail set
IRDP is enabled
event debugging is disabled
nsm debugging is disabled
packet debugging mode is all
irdp both set
IRDP is enabled
event debugging is disabled
nsm debugging is disabled
packet debugging mode is both
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
"Getting Started
Guide.
870
Advertisement
Table of Contents
