Table of Contents
Advertisement
--- Number of secure MAC addresses: 1 ---
Table 33 Command output
Field
MAC ADDR
VLAN ID
STATE
PORT INDEX
AGING TIME
Number of secure MAC addresses
Related commands
port-security mac-address security
port-security access-user log enable
Use port-security access-user log enable to enable logging for port security users.
Use undo port-security access-user log enable to disable logging for port security users.
Syntax
port-security access-user log enable [ failed-authorization | mac-learning | violation ] *
undo port-security access-user log enable [ failed-authorization | mac-learning | violation ] *
Default
Logging is disabled for port security users.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
failed-authorization: Specifies logs generated for authorization failures of 802.1X or MAC
authentication users.
mac-learning: Specifies logs generated for new MAC address learning.
violation: Specifies logs generated when intrusion protection is triggered.
Description
Secure MAC address.
ID of the VLAN to which the port belongs.
Type of the MAC address. This field displays Secure for a secure
MAC address.
Port to which the secure MAC address belongs.
Period of time before the secure MAC address ages out.
•
If the secure MAC address is a static MAC address, this field
displays Not aged.
•
If the secure MAC address is a sticky MAC address, this field
displays the remaining lifetime. If the remaining lifetime is less
than 60 seconds, the lifetime is counted in seconds. If the
lifetime is not less than 60 seconds, the lifetime is counted in
minutes. By default, sticky MAC addresses do not age out,
and this field displays Not aged.
Number of secure MAC addresses stored.
313
Advertisement
Table of Contents
