Bootrom-Update Security-Check Enable; Display Boot-Loader - HP 6125G Command Reference Manual

# Use the a.btm file to upgrade BootWare on IRF member device 2 (a subordinate device). This example
assumes that the upgrade file has been saved in the root directory of the storage medium on the
subordinate device.
<Sysname> bootrom update file slot2#flash:/a.btm slot 2
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
Now updating bootrom, please wait...
Bootrom update succeeded in slot 2.

bootrom-update security-check enable

Syntax
bootrom-update security-check enable
undo bootrom-update security-check enable
View
System view
Default level
2: System level
Parameters
None
Description
Use bootrom-update security-check enable to enable BootWare image validity check.
Use undo bootrom-update security-check enable to disable BootWare image validity check.
By default, BootWare image validity check is enabled.
Before a BootWare image upgrade starts, the BootWare image validity check function examines the
upgrade BootWare image for file validity or incompatibility with hardware. If the BootWare image
passes the check, the upgrade process starts. If not, the system does not perform the upgrade.
Examples
# Enable BootWare image validity check.
<Sysname> system-view
[Sysname] bootrom-update security-check enable

display boot-loader

Syntax
display boot-loader [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
2: System level
Parameters
slot slot-number: Specifies the member ID of an IRF member device. If no member device is specified, this
command displays the system software images on each IRF member device.
123