Sector Erase Resumption - Fujitsu MB90895 Series Hardware Manual

19.8.6

Sector Erase Resumption

This section explains the procedure for inputting the sector erase resume command to
resume erasing of the suspended flash memory sector.
I Erase Resumption
• Suspended sector erasing can be resumed by continuously transmitting the sector erase
resume command in the command sequence table from CPU to flash memory.
• The sector erase resume command resumes sector erasing suspended by the sector erase
suspend command. This command is executed by writing the erase resume code (30
case, even address in the specified sector for erase area is specified.
• Inputting the sector erase resume command during sector erasing is ignored.
CHAPTER 19 512 KBIT FLASH MEMORY
). In this
H
607