Fujitsu MB90895 Series Hardware Manual page 396

CHAPTER 13 8/10-bit A/D converter
Notes: • The A/D conversion data protection function is activated only when an interrupt request is
enabled.Set the interrupt request enable bit in the A/D control status register (ADCS:
INTE) to "1".
• When the EI
disable output of an interrupt request.If output of an interrupt request is disabled during a
pause of A/D conversion (ADCS: INTE = 0), A/D conversion may be restarted to rewrite
data being transferred.
• When the EI
restart.Restarting during a pause of A/D conversion may cause loss of the A/D conversion
results.
378
2
OS function is used to transfer the A/D conversion results to memory, do not
2
OS function is used to transfer the A/D conversion results to memory, do not