Fujitsu MB90895 Series Hardware Manual page 392

CHAPTER 13 8/10-bit A/D converter
[When start and end channels are the same]
• If the start and end channels have the same channel number (ADCS: ANS2 to ANS0 = ADCS: ANE2 to
ANE0), A/D conversion for one channel set as the start channel (= end channel), and pause are repeated.
[Conversion order in pause-conversion mode]
Table 13.5-3 gives an example of the conversion order in the pause-conversion mode.
Table 13.5-3 Conversion Order in Pause-conversion Mode
Start Channel
AN0 pin
(ADCS: ANS="000
AN6 pin
(ADCS: ANS="110
AN3 pin
(ADCS: ANS="011
374
End Channel
AN3 pin
") (ADCS: ANE="011
B
AN2 pin
") (ADCS: ANE="010
B
AN3 pin
") (ADCS: ANE="011
B
Conversion Order in Single-shot
Conversion Mode
→
AN0 Stop, Start
→ →
")
AN2 Stop, Start
B
→ →
Start AN0 Repeat
→
AN6 Stop, Start
→ →
)
AN0 Stop, Start
B
→ →
Start AN2 Stop, Start
Repeat
→
AN3 Stop, Start
→
")
Repeat
B
→ →
AN1 Stop, Start
→ →
AN3 Stop,
→ →
AN7 Stop, Start
→ →
AN1 Stop,
→ →
AN6
→ →
AN3 Stop, Start