6) Remove the screw [2].
[2]
7) Open the feeder cover guide.
8) Remove the white plate [1].
- Tab [2] 2pcs.
[1]
Be careful not to lose the two springs [3].
9) Remove the read guide unit [1].
- Screw [2] 2pcs.
- Tab [3] 2pcs.
[1]
F-5-30
[3]
[2]
F-5-31
[3]
10) Remove the document edge sensor [1].
- Connector [2] 1pc.
[1]
5.4.10 Registration Sensor
5.4.10.1 Removing the Registration Sensor
1) Remove the rear cover.
2) Remove the ring arm and open the feeder cover.
3) Remove the sensor cover [1].
- Screw [2] 1pc.
[1]
4) Remove the registration sensor [1].
- Connector [2] 1pc.
Chapter 5
[1]
[2]
F-5-32
[2]
F-5-33
[2]
F-5-34
0017-7075
5-13