CAUTION:
Install the sensor part onto the position as shown in the figure.
Removing the Lifter Drive Unit
■ Preparation
1. Pull out the Cassette1.
2.
" Removing the Rear Cover" on page 109
3.
" Removing the Left Rear Cover" on page 109
4.
" Removing the Main Controller PCB" on page 193
5.
"Removing the Inlet Cover" on page 111
6.
" Removing the Low-Voltage Power Supply PCB" on page 195
■ Procedure
1.
3x
209
4. Parts Replacement and Cleaning