Table of Contents
Advertisement
Setting a Wait Time for Connecting to a Network
When a network is designed to enjoy redundant connectivity with multiple switching hubs or bridges, it must have a
mechanism to prevent packets from looping. One effective solution is to define the role of each switch port. However,
communication may still be disrupted for several tens of seconds immediately after you change the way that network
devices are connected, or if you add a new device. If this type of problem occurs, set a wait time for connecting to the
network.
1
Press
.
2
Use
/
to select <Network Settings>, and press
●
If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and press
the System Manager PIN(P. 228)
3
Select <Waiting Time for Connection at Startup>, and press
4
Enter the wait time in seconds, and press
●
Use
/
or the numeric keys to enter the time.
LINKS
Configuring Ethernet Settings(P. 207)
Changing the Maximum Transmission Unit(P. 209)
Network (MF244dw / MF232w)
210
.
.
.
1560-045
.
Setting
Advertisement
Table of Contents
