System Error. Please Wait; This Password Is About To Expire - Bayer HealthCare RapidPoint 400 Series Service Manual

Rev. C
Insufficient Sample Volume. The system
cannot complete analysis. Touch
to begin the sequence to clear the system.
Replace the sample port when prompted.
M Cartridge Expired
M Cartridge Not Valid
No AQC Cartridge
No M Cartridge
No Paper in Printer
No W Cartridge
Out of Reporting Range
QC Lot Not Defined
QC Material Expired
Question Result:
Required QC Due
Sensors Unavailable For QC
SulfHb > 1.5%
System Error. Please wait. The system is
trying to recover from the error.
System Error. Turn the power switch off.
Wait 10 seconds then turn the switch on.
System requires operator attention.
Temp Not Ready
Temp Out of Range
Temp Warning
The language cannot be selected because
the current version is not installed. Install
the latest language version to select the language.
The system detected an obstruction and
cannot complete analysis. Touch
to begin the sequence to clear the obstruction.
Replace the sample port when prompted.
The system did not detect a sample. Remove
the sample device if present and touch
Replace the sample port when prompted
This password is about to expire. Renew the
password before access to the system is denied.
Continue
Continue
.
Continue
216
216
216
217
217
218
219
219
219
219
219
220
220
220
220
221
221
222
223
225
226
227
227
228
11