System - Bayer HealthCare RapidPoint 400 Series Service Manual

d. Select
e. Write down the Rapidpoint 400 series system IP address or name
displayed in the lower left field.
6. Generate Trace Log and Sensor Data diskettes:
a. At the Rapidpoint 400 series system, touch the
b. Touch
c. Insert a blank preformatted diskette into the diskette drive, then
touch the
d. The Wait screen appears while the system copies the data to the
diskette.
e. When prompted, remove the diskette form the drive and touch the
Continue
f. Touch
g. Select today's date and touch
h. Insert another blank preformatted diskette into the diskette drive
and touch the
i. The Wait screen appears while the system copies the data to the
diskette.
j. When prompted, remove the diskette from the drive and touch the
Continue
7. Remove the AutomaticQC cartridge, if present.
8. Remove the measurement and wash/waste cartridges, if present.
9. Shut down the system.
10. At the Status screen, touch
11. Unplug the following from the back of the Rapidpoint 400 series

system:

• power cord from the back
• barcode scanner
• RJ-45 cable
Rev. C
Edit System Setup
.
Copy Trace Log
button.
Continue
button.
Copy Sensor Data
button.
Continue
button twice.
Shutdown
Swapping Out a Rapidpoint 400 Series System 413
.
.
.
Copy
.
button.
Recall