Bayer HealthCare RapidPoint 400 Series Service Manual page 305

5. Complete the necessary task:
If . . .
the system prompts you again to
replace the sample port
the system returns to the Analysis
screen
the system displays the Status
screen and prompts you to
replace the cartridges
Rev. C
Then . . .
repeat this procedure from step 3.
resume operating tasks.
replace the measurement and wash/waste
cartridges as described in Replacing the
Measurement and Wash/Waste Cartridges
in Section 3 in the Rapidpoint 400 Series
Operator's Manual.
Replacing Components 305