Bayer HealthCare RapidPoint 400 Series Service Manual page 408

a. If prompted, enter your password, the service password, or the
password of the day.
b. Touch the
c. Touch
d. Touch
e. Touch
f. Touch
g. Select the communication settings that the LIS requires:
Setting
Baud
Parity
Data Bits
Modem
h. Touch the
8. At the Communications screen, touch the
The Wait screen appears while the system tests the connection
between the Rapidpoint 400 series system and the LIS. If an error
message appears, refer to System Messages in Troubleshooting.
9. Complete any setup at the LIS that may be required to communicate
with the Rapidpoint 400 series system.
408
button.
Status
.
Setup
Printer and Devices
.
Communications
and then touch
RS-232
Default
9600
Even
8
None (no modem
connected)
button.
Continue
.
.
Configure
Options
1200, 2400, 4800, 9600, 19200
None, Odd, Even
7, 8
Full (full duplex modem), None
Continue
button.
Rev. C