Bayer HealthCare RapidPoint 400 Series Service Manual page 412

2. Capture and record the following information from the current
Rapidpoint 400 series system:
• option selected for CompleNet, either Use DHCP or Enter IP
Address
• Rapidpoint 400 Name
• Rapidpoint 400 IP Address
a. Touch
b. Touch
c. Touch
d. Touch
e. Write down the Rapidpoint 400 series system IP address
displayed here.
f. Touch the
Status screen.
3. If required, record the System Name:
a. Touch
b. Touch
c. Write down the required information.
4. If required, record the FTP Server name or IP address:
a. Touch the
b. Touch
c. Touch
d. Enter the service password.
e. Write down the required information.
5. Capture and record the Rapidpoint 400 series system IP address from
the Rapidlink system:
a. At the Rapidlink workstation, select
b. Select
c. Select the current Rapidpoint 400 series system.
412
and then touch
Setup
.
Communications
.
CompleNet
.
Configure
button as needed to access the Setup or
Continue
.
System Options
.
Other Options
button.
Recall
.
Sample Totals
.
Service Data
tab.
Devices
Printer and Devices
.
Setup
.
Rev. C