Adding Upload And Download Directories - Bayer HealthCare RapidPoint 400 Series Service Manual

2. Select
3. Select
4. In the user name field, type
5. In the Password field, type
6. Verify the password by typing it again.
7. Ensure that
8. Select
9. In the Call Back box, ensure that
checked.
10. Select
11. Select
In the Member of box,
12. Select

Adding Upload and Download Directories

The Rapidlink system must have two directories for the Rapidpoint 400
series system to use.
• The Upload directory is used by the Rapidpoint 400 series system to
copy files to.
• The Download directory is for future use. This Download directory will
be used by the Rapidpoint 400 series system in order to get files. (Such
as upgrades to the 400).
Previously, both the Upload and the Download directories were under the
\\inetpub\ftproot directory. Since the FTP server is no longer required, the
Upload and the Download directories no longer need to be placed in that
path. As long as the share name is correct, the location of the two
directories does not matter. However, they should be on a partition other
than the system (C:) drive. It is recommended you place them in the
D: drive, if available.
436
in the top left corner of the dialog box.
User
New User.
Password Never Expires
and then check the
Dialin
.
OK
.
Groups
Users
twice and then close the Manager window.
OK
.
Rapidpoint
(the password is case sensitive).
400series
is the only option selected.
Grant dialin to user
No Call Back
appears.
option.
is the only option
Rev. C