Testing The Printer - Bayer HealthCare RapidPoint 400 Series Service Manual

Refer to the table on page 241 for measurement channel signal names and
ranges.
Sample Sensor Report
Sample Temperature Report
Refer to the table on page 235 for definitions for a printed temperature
report.

Testing the Printer

Use this procedure to check that the printer character set is functioning
correctly.
1. Touch the
2. Touch
Sample Totals
The system cannot perform routine fluidic activities while you
CAUTION:
are at the Diagnostics screen or while you are performing diagnostic tests.
When you exit from the Diagnostics screen, the system may perform an
extended calibration before you can use the system.
3. Touch
Diagnostics
Rev. C
button.
Recall
.
.
Troubleshooting 233