Bayer HealthCare RapidPoint 400 Series Service Manual page 144

4. Select the calibration type and touch .
Start
The calibration begins. The system displays a message indicating that
the system is busy.
Figure 4-1: Calibration Message
1 Shows time remaining until the calibration finishes.
2 Touch to view the Reference Guide.
3 Touch to access the Recall options.
4 Touch if you want to interrupt the calibration to analyze a sample.
STAT
If a parameter fails the calibration, the calibration repeats. When the
calibration is finished, the Analysis screen appears.
144 Rev. C