Replacing The Power Entry Module With Switch - Bayer HealthCare RapidPoint 400 Series Service Manual

Replacing the Power Entry Module With Switch

BIOHAZARD:
CAUTION:
devices. Use an antistatic mat and wrist strap when handling PC boards.
Tools and Supplies
• Phillips screwdriver, #1
1. Turn the system off and disconnect all the external cables from the
back of the system.
2. Remove the rear cover and power module assembly. Refer to
Removing the Rear Cover and Power Module Assembly on page 375.
3. Disconnect the power entry module from the power supply (J1).
340
Refer to Biohazards and Warnings.
Electrical shock hazard. Refer to Biohazards and Warnings.
Observe precautions for handling electrostatic-sensitive
Rev. C