Rapidlink System - Bayer HealthCare RapidPoint 400 Series Service Manual

Remote Access Setup to the Rapidlink System
This procedure is for remote access setup of a previously installed
Rapidlink system being connected to a 2.1 version of the Rapidpoint 400
series system. The 2.1 version of the Rapidpoint 400 series system uses
Windows NT as an operating system. This configuration does not require
or use an FTP server. All new Rapidlink configurations provided by CBE
comply with the 2.1 version configuration.
This procedure is intended for a Rapidlink database server.
Rapidpoint 400 series systems must be connected through the network.
PCAnywhere must be installed and turned on for the Rapidlink computer.
Rev. C Remote Access Setup to the Rapidlink System 433