Replacing The Paper Cover - Bayer HealthCare RapidPoint 400 Series Service Manual

Replacing the Paper Cover

BIOHAZARD:
CAUTION:
devices. Use an antistatic mat and wrist strap when handling PC boards.
Tools and Supplies
• Phillips screwdriver, #1
• small flat-blade screwdriver
1. Turn the system off and disconnect all the external cables from the
back of the system.
2. Remove the rear cover. Refer to Removing the Rear Cover and Power
Module Assembly on page 375.
3. Remove the ampule breaker or AutomaticQC cartridge and open the
front door.
4. Using the tilt display handle, pull the display forward.
5. Using a flat-blade screwdriver, press the spring pawl down while
pulling the display forward so that the display support slides out of the
slot in the interface wall.
330
Refer to Biohazards and Warnings.
Electrical shock hazard. Refer to Biohazards and Warnings.
Observe precautions for handling electrostatic-sensitive
.
Rev. C