Bayer HealthCare RapidPoint 400 Series Service Manual page 21

Symbol
I
Class 1
Rev. C
Description
This symbol identifies that the system is type B equipment,
which provides a particular degree of protection against
electric shock.
This symbol indicates that the main power supply is on.
This symbol indicates that the main power supply is off.
This symbol indicates that the system is class 1 type
equipment, which has basic insulation and additional safety
grounding precautions. Reference Underwriters Laboratories
Document for Medical Electrical Equipment, Part 1: General
Requirements for Safety, UL 2601-1.
This symbol indicates that the system is approved by UL as
meeting U.S. requirements for safety.
This symbol indicates that the system meets the requirements
of the European Union.
This symbol indicates that the system is approved by CSA as
meeting the U.S. and Canadian requirements for safety.
This symbol indicates the type of measurement cartridge that
can be installed on the system.
This symbol indicates the area to write the date the cartridge is
installed on the system, if required.
This symbol cautions you not to spray this area with cleaning
solutions or other fluids that may damage sensitive parts of the
system.
In vitro diagnostic device
Consult instructions for use
Temperature limitation (2°C - 8°C)
Contains sufficient for (n) tests (250 tests)
Catalog number
(Continued)
Preface 21