Installing The Automaticqc Cartridge - Bayer HealthCare RapidPoint 400 Series Service Manual

looking directly into the light beam to prevent possible exposure to
hazardous light.
12. Test the scanner if required:
a. Aim the scanner away from you.
b. Press the trigger.
The red laser beam lights when the bar code scanner is working.
13. Analyze quality control samples as required by your institution's quality
control protocol before analyzing patient samples.

Installing the AutomaticQC Cartridge

Use this procedure to install an AutomaticQC cartridge on your
Rapidpoint 400 series system for the first time.
Material:
• AutomaticQC cartridge
1. Remove the ampule breaker from the system.
2. Turn AutomaticQC analysis on in Setup:
a. Touch the
b. Touch
c. Touch
d. Touch
e. Touch the
The system displays the Status screen and a message indicating
that the measurement cartridge needs replacing.
394
The bar code scanner emits a low-power visible laser. Avoid
button.
Status
.
Setup
.
QC Options
.
AutomaticQC
button twice.
Continue
Rev. C