Bayer HealthCare RapidPoint 400 Series Service Manual page 455

System Error. Please wait., 220
System Error. Turn the power
switch off., 221
System requires operator
attention., 221
Temp Not Ready, 222
Temp Out of Range, 223
Temp Warning, 225
The language cannot be selected .
. ., 226
The system detected an
obstruction and cannot complete
analysis., 227
The system did not detect a
sample. Remove the sample
device if present and touch
Continue. Replace the sample
port when prompted., 227
This password is about to expire . .
., 228
This password is expired., 228
Uncorrected, 228
Unrecoverable System Error., 228
Unsuccessful Connection., 229
W Cartridge Expired, 229
System requires operator attention.
message, 221
system,
calibrations overview, 427
detecting IDEE ROM,
explanation, 420
installing a new Rapidpoint
400, 414
installing the Rapidpoint 400, 391
relocating the Rapidpoint 400, 396
shutting down the, 256
Rev. C
swapping out a Rapidpoint
400, 411
system, shipping or storing, 397
T
tables,
initialization calibration
timeline, 431
target button, calibrating, 147
target value and absolute limits,
selecting, 416
Temp Not Ready message, 222
Temp Out of Range message, 223
Temp Warning message, 225
testing,
AutomaticQC cartridge valve in
diagnostics, 237
measurement valve in
diagnostics, 235
the printer, 233
the pump flow, 242
the pumps, 238
tests,
AQC valve function, 230
lamp calibration, 252
lamp on/off, 254
M valve function, 230
measurement function, 230
printer function, 230
sample chamber, 255
sample pump function, 230
sensors function, 230
wash pump, 230
wavelength calibration, 253
Index 455