Rapidpoint 400 Series System (rear view)
1 Serial Port: Allows serial connection to a Rapidlink data management system or
an LIS.
2 Network Port: Allows network connection to a Rapidlink data management system.
3 Screen Latch: Allows you to adjust the viewing angle of the screen.
4 Handle: Helps you to move the system.
5 Co-ox Lamp: Appears only in Rapidpoint 405 systems.
6 Power Switch
7 Fuse Compartment
8 Power Input
9 Bar Code Port: Allows you to connect the optional bar code scanner to the system.
The scanner allows you to identify patient and QC samples by scanning their bar
codes.
10 Air Filter
30
Rev. C