Configuring Ras To Start Automatically - Bayer HealthCare RapidPoint 400 Series Service Manual

19. Select
OK
20. Select
Continue
If either NetBEUI or TCP/IP options had to be checked in step 11,
NOTE:
the system may copy more files from the NT CD at this time.
21. Select the
The NetBEUI and WINS Client protocol entries appear.
22. Under the Remote Access Server Service entry, highlight the
protocol and make it the first protocol in the list [above WINS Client
(TCP/IP)] by selecting
23. Under the Remote Access Server Service entry, highlight the
WINS Client (TCP/IP)
24. Remove the Windows NT Workstation or NT Server CD from the
CD-ROM drive.
25. Close the Network applet and restart the system when prompted.

Configuring RAS To Start Automatically

1. From the Windows NT desktop, log on as Administrator.
The Rapidlink program launches.
2. To close the Rapidlink program, press
3. From the Windows NT desktop Start menu, select
select
Control Panel
4. Double click the
5. Scroll down in the Services window and select
and then select
6. In the Startup Type window, select
7. Select
Close
Adding Rapidpoint to Users and Groups
1. From the Windows NT desktop Start menu, select
Administrative Tools, User Manager
Rev. C
twice.
and then select
tab and then select
Bindings
Move Up
protocol and then select
.
icon.
Services
.
Startup
and then close the Control Panel.
Remote Access Setup to the Rapidlink System 435
.
OK
Remote Access Server Service
.
Disable
and
Alt F4
Remote Access Server
and then select
Automatic
.
NetBEUI
.
at the same time.
and then
Settings
OK.
Program,
.