Bayer HealthCare RapidPoint 400 Series Service Manual page 307

b. Pull the fuse holder out from the compartment as far as possible.
c. Push the fuse holder down to access the fuses.
5. Remove the old fuses and install new fuses.
6. Slide the fuse holder into the fuse compartment.
7. Reconnect the power cord to the system.
8. Reconnect the power cord to the electrical outlet and turn the power
switch on.
After the Rapidpoint 400 series system title screen appears, the Wait
screen displays the time remaining until you can use the system. The
Analysis screen appears when the system is ready to analyze
samples.
Rev. C Replacing Components 307