Viewing The Events Log - Bayer HealthCare RapidPoint 400 Series Service Manual

Viewing the Events Log

Use this procedure to view the events log, which lists system messages
that provide information about system activities and error conditions.
You can view the events log two ways:
• At the Status screen, you can view unresolved system messages that
provide information about current system conditions.
• From the Recall menu, you can view a historical log of current and
previous system conditions.
To view current system messages at the Status screen:
1. If prompted, enter your password, the service password, or the
password of the day.
2. Touch the
The events log shows the list of messages about current system
conditions, such as a message for a sensor that is out of calibration.
Refer to System Messages on page 177, for more information about
each message.
3. Touch the up and down arrows to view additional messages.
4. Touch the
To view a historical list of system messages:
1. If prompted, enter your password, the service password, or the
password of the day.
2. Touch the
3. Touch
Events Log
The system displays a historical list of system messages. The list
contains the messages for up to 250 system events.
Refer to System Messages on page 177, for more information about
each message.
4. Touch the up and down arrows to view additional messages.
5. Touch the
176
button.
Status
button to return to the Analysis screen.
Continue
button.
Recall
.
button twice to return to the Analysis screen.
Continue
Rev. C