Table of Contents
Advertisement
RAJ306101 RSSK User's Manual
3.2.3
Operation Guide
3.2.3.1
Connections
Follow the procedures below to build the evaluation environment.
a. Write sensorless vector control FW to the Evaluation Board.
b. Connect the Evaluation Board and the motor U, V, and W by the attached cable. (Sensorless vector control
does not require the connections of Hall signals.)
c. Connect the power source and the Evaluation Board. (Do not supply power at this time.)
The RAJ306101 RSSK includes a ferrite core to comply with the EMC Directive. Please use the ferrite core
with 2 turns as necessary.
-
+
R12UZ0129EJ0100
Rev.1.00
Nov 1, 2023
Power Source (Output: Off)
+
Motor (TG-55L-KA,24V)
Figure 3-4 Connections for Evaluation Environment
DC 24[V]/2[A] limit.
Ferrite Core (2 turns)
Evaluation Board
-
Motor Cable
(U: Orange line, V: White line, W: Blue line)
Chapter 3. Usage
Page 19 of 55
Advertisement
Table of Contents
