Operation Guide - Renesas RAA306012 User Manual

RAA306012 RSSK User's Manual
3.2.3

Operation Guide

3.2.3.1 Connections
Follow the procedures below to build the evaluation environment.
a. Connect the RX13T Control Board with sensorless vector control FW written on it to the Evaluation Board.
b. Connect the Evaluation Board and the motor U, V, and W by the attached cable. (Sensorless vector control
does not require the connections of Hall signals.)
c. Connect the power source and the Evaluation Board. (Do not supply power at this time.)
The RAA306012 RSSK includes a ferrite core to comply with the EMC Directive. Please use the ferrite core
with 2 turns as necessary.
- +
R12UZ0128EJ0100 Rev.1.00
Nov 1, 2023
Power Source (Output: Off)
+
Motor (TG-55L-KA,24V)
Figure 3-4 Connections for Evaluation Environment
DC 24[V]/2[A] limit.
Ferrite Core (2 turns)
Evaluation Board
-
Motor Cable
(U: Orange line, V: White line, W: Blue line)
3. Usage
RX13T Control Board
Page 28 of 76