Radius Server; Radius Server For System Authentication; Radius Server Priority; Timeout Of Authentication Request - Siemens S223 User Manual

User Manual
SURPASS hiD 6615 S223/S323 R1.5
4.2.4
4.2.4.1
i
4.2.4.2
4.2.4.3
A50010-Y3-C150-2-7619

RADIUS Server

RADIUS Server for System Authentication

To add/delete the RADIUS server for system authentication, use the following command.
Command
login radius server A.B.C.D
KEY
login radius server A.B.C.D
KEY auth_port PORT acct_port
PORT
no login radius server A.B.C.D
You can add up to 5 RADIUS servers.

RADIUS Server Priority

To specify the priority of a registered RADIUS server, use the following command.
Command
login radius server
A.B.C.D <1-5>

Timeout of Authentication Request

After the authentication request, the hiD 6615 S223/S323 waits for the response from the
RADIUS server for specified time.
To specify a timeout value, use the following command.
Command
login radius timeout <1-100>
Mode
Adds the RADIUS server with its information.
A.B.C.D: RADIUS server address
KEY: authentication key value
Adds the RADIUS server with its information.
Global A.B.C.D: RADIUS server address
KEY: authentication key value
auth_port: Enters authentication port number(optional)
acct_port: Enters accounting port number(optional)
Deletes an added RADIUS server.
Mode
Specifies the priority of RADIUS server.
move
Global
A.B.C.D: IP address
1-5: priority of RADIUS server
Mode
Specifies a timeout value.
Global
1-100: waiting-time for the response (default: 3)
UMN:CLI
Description
Description
Description
51