No Debug All - Allied Telesis AR2050V Command Reference Manual

S C M
YSTEM ONFIGURATION AND

NO DEBUG ALL

no debug all
Overview This command disables the debugging facility for all features on your device. This
stops the device from generating any diagnostic debugging messages.
The debugging facility is disabled by default.
Syntax no debug all [ipv6|nsm|ospf|pim sparse-mode|rip|vrrp]
Mode Global Configuration and Privileged Exec
Example To disable debugging for all features, use the command:
awplus#
To disable all bgp debugging, use the command:
awplus#
To disable all IPv6 debugging, use the command:
awplus#
To disable all NSM debugging, use the command:
awplus#
To disable all OSPF debugging, use the command:
awplus#
To disable all PIM Sparse Mode debugging, use the command:
awplus#
To disable all RIP debugging, use the command:
awplus#
C613-50186-01 Rev B
C
ONITORING OMMANDS
Parameter
bgp
ipv6
nsm
ospf
pim sparse-mode
rip
vrrp
no debug all
no debug all bgp
no debug all ipv6
no debug all nsm
no debug all ospf
no debug all pim sparse-mode
no debug all rip
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Turns off all debugging for BGP (Border Gateway Protocol).
Turns off all debugging for IPv6 (Internet Protocol version 6).
Turns off all debugging for the NSM (Network Services
Module).
Turns off all debugging for OSPF (Open Shortest Path First).
Turns off all debugging for PIM (Protocol Independent
Multicast) Sparse Mode.
Turns off all debugging for RIP (Routing Information Protocol).
Turns off all debugging for VRRP (Virtual Router Redundancy
Protocol).
230